Name: 2.0Amp Corded Electric Drill, 3/4 Inch
Brand: Tool
SKU: 51
Availability: InStock

2.0Amp Corded Electric Drill, 3/4 Inch

Size chart

Clothing Size Conversion Chart
Category	US	EU	UK	Chest (in)	Waist (in)	Hips (in)
Men	XS	44	34	32-34	26-28	33-35
	S	46	36	34-36	28-30	35-37
	M	48	38	38-40	32-34	39-41
	L	50	40	42-44	36-38	43-45
	XL	52	42	46-48	40-42	47-49
Women	XS	32	6	31-32	24-25	33-34
	S	34	8	33-34	26-27	35-36
	M	36	10	35-36	28-29	37-38
	L	38-40	12-14	37-39	30-32	39-41
	XL	42	16	40-42	33-35	42-44
Youth	XS	128	7	26-28	23-24	26-28
	S	134	8	28-30	24-25	28-30
	M	140	10	30-32	25-26	30-32
	L	146	12	32-34	26-27	32-34
	XL	152	14	34-36	27-28	34-36

Pants Size Conversion Chart
Category	US	EU	UK	Waist (in)	Hip (in)	Inseam (in)
Men	28	44	28	28	34	30
	30	46	30	30	36	31
	32	48	32	32	38	32
	34	50	34	34	40	33
	36	52	36	36	42	34
Women	0	32	4	24	34	30
	2	34	6	25	35	30
	4	36	8	26	36	31
	6	38	10	27	38	32
	8	40	12	28	40	32

Shoes Size Conversion Chart
Category	US	EU	UK	Foot Length (in)
Men	6	39	5.5	9.25
	7	40	6.5	9.625
	8	41	7.5	10
	9	42	8.5	10.25
	10	43	9.5	10.625
	11	44	10.5	11
	12	45	11.5	11.25
	13	46	12.5	11.625
Women	5	35	2.5	8.5
	6	36	3.5	8.875
	7	37	4.5	9.25
	8	38	5.5	9.625
	9	39	6.5	10
	10	40	7.5	10.25
	11	41	8.5	10.625
	12	42	9.5	11
M (Unisex)	5	37	4.5	8.75
	6	38	5.5	9
	7	39	6.5	9.5
	8	40	7.5	10
	9	41	8.5	10.25
	10	42	9.5	10.625
	11	43	10.5	11
	12	44	11.5	11.25

63 People watching this product now!

The corded electric drill can be used for drilling on wood, metal, brick, tile, etc. Lightweight, compact size, easy to operate by hand.

Specification

Model	T-XJZ04-10A
Max. Drill Bit Diameter	wood: 3/4 inch (20mm) metal: 10mm
Rated Voltage	220V/50Hz, 240V/60Hz
Rated Power	450W
Rated Current	2.0A, 1.9A
No-Load Speed	0-2600 rpm
Chuck Capacity	10mm
Max. Torque	20 N.m
Weight	1.2 kg

Corded Electric Drill Applications: Wall drilling, door and window installation, shelf installation, table and chair installation, pendant installation, etc.

Corded Electric Drill Structure Diagram

Drill Bit Installation

Press the lower part of chuck tightly, twist the upper part left and right to adjust the three-jaw chuck to a suitable position.
Put the suitable drill bit into three-jaw chuck and adjust it to a suitable length.
Press the lower part of chuck tightly, rotate the upper part of chuck clockwise, and tighten it firmly.

Tips: Corded electric drill use precautions.

Check whether power cord is damaged before using corded electric drill. If it is damaged, it must be wrapped with insulating tape. During using, do not let electric drill touch water, or drag and step it, or touch heat sources and corrosive media.
To prevent corded electric drill from turning suddenly when plug is inserted into power socket, make sure that the switch is in the off state before use.
Before use, check whether the transmission part is flexible, whether there is abnormal noise, whether screw is loose, and whether commutator spark is normal. You can let corded electric drill rotate without loading for 0.5~1 minute to observe the status.
Hold corded electric drill firmly with both hands when drilling, and do not operate with one hand as much as possible.
Do not use drill bit with gap. Do not press too much downward force when drilling to prevent drill bit from breaking.
Operations such as cleaning up drill bit scraps and replacing drill bit must be performed with disconnected power supply.