Cable Tie Tire Chain for Car/SUV/MPV, Size 12*950mm

Cable tie snow chains have the lightest structure and the simplest installation method. A set of tire chain has 10 pieces of anti-skid cable ties in a poly bag. It is recommended to use one set for one tire. When driving on snow, the vehicle speed needs to be controlled below 30km/h.

Specification:

Feature:

• New material
  Tire chain adopts new nylon material for injection molding, one-piece molding, smooth appearance, high strength, good toughness, corrosion resistance, low temperature resistance and safer driving.
• Adjustable length
  The length of the snow chain can be adjusted freely through the wear-resistant cable tie. It is suitable for most wheels with 14-24 inch size, not for truck wheels.
• Simple installation
  Tire chain can be installed according to the anti-skid requirements, and the density is adjustable. No need a car jack.
• Small damage to the automotive tire
  Anti-skid tire chain will not scratch the wheel hub. The sustainable driving distance is about 40 kilometers.
• Four anti-skid designs
  1. Small square point spikes
     Two row small square point spikes have wear-resistant, good ice-breaking slip resistance and strong ice-breaking. They assist tires adding grip, ice-breaking performance and anti-skid resistance, improving the safety of driving on icy and snowy ground.
  2. Laminated sawtooth anti-skid pattern
     The sawtooth anti-skid pattern is deeper. Anti-skid pattern increases the contact surface, which will improve the anti-skid performance and the wear resistance. The longitudinal sawtooth pattern increases the steering resistance of the tire and prevents sideslip.
  3. Gaps between spikes
     The gaps increase the depth of anti-skid grooves, combined with anti-skid spikes, greatly improve the performance of tire drainage and snow removal.
     The drainage of the tire determines its grip performance and safety performance. The drifting accident after tire wear is caused by the loss of drainage when the tire drain groove is heavy wear.
  4. Anti-skid points in back
     The anti-skid points are set on the back to fit the tire to prevent the tire and the snow chain from sliding, and the safety factor is enhanced.

Installation:

1. Take the buckle end of the anti-skid chain and insert it from the hole of wheel hub, and then pull it back.
2. The tail of the cable tie tire chain is inserted into the buckle. And then tighten the anti-skid tie.
3. Put the extra long cable tie back and tie a knot, or put it back into another anti-skid chain to fix it.

Removal:

1. Insert a slotted screwdriver into the buckle.
2. Hold the buckle and pull the anti-skid tie out until all the cable tie is out.
3. Remove all the cable tie tire chain and storage them back to the bag.