Name: 16mm Spark Plug Socket 6-Point
Brand: Tool
SKU: 889
Availability: InStock

16mm Spark Plug Socket 6-Point

Size chart

Clothing Size Conversion Chart
Category	US	EU	UK	Chest (in)	Waist (in)	Hips (in)
Men	XS	44	34	32-34	26-28	33-35
	S	46	36	34-36	28-30	35-37
	M	48	38	38-40	32-34	39-41
	L	50	40	42-44	36-38	43-45
	XL	52	42	46-48	40-42	47-49
Women	XS	32	6	31-32	24-25	33-34
	S	34	8	33-34	26-27	35-36
	M	36	10	35-36	28-29	37-38
	L	38-40	12-14	37-39	30-32	39-41
	XL	42	16	40-42	33-35	42-44
Youth	XS	128	7	26-28	23-24	26-28
	S	134	8	28-30	24-25	28-30
	M	140	10	30-32	25-26	30-32
	L	146	12	32-34	26-27	32-34
	XL	152	14	34-36	27-28	34-36

Pants Size Conversion Chart
Category	US	EU	UK	Waist (in)	Hip (in)	Inseam (in)
Men	28	44	28	28	34	30
	30	46	30	30	36	31
	32	48	32	32	38	32
	34	50	34	34	40	33
	36	52	36	36	42	34
Women	0	32	4	24	34	30
	2	34	6	25	35	30
	4	36	8	26	36	31
	6	38	10	27	38	32
	8	40	12	28	40	32

Shoes Size Conversion Chart
Category	US	EU	UK	Foot Length (in)
Men	6	39	5.5	9.25
	7	40	6.5	9.625
	8	41	7.5	10
	9	42	8.5	10.25
	10	43	9.5	10.625
	11	44	10.5	11
	12	45	11.5	11.25
	13	46	12.5	11.625
Women	5	35	2.5	8.5
	6	36	3.5	8.875
	7	37	4.5	9.25
	8	38	5.5	9.625
	9	39	6.5	10
	10	40	7.5	10.25
	11	41	8.5	10.625
	12	42	9.5	11
M (Unisex)	5	37	4.5	8.75
	6	38	5.5	9
	7	39	6.5	9.5
	8	40	7.5	10
	9	41	8.5	10.25
	10	42	9.5	10.625
	11	43	10.5	11
	12	44	11.5	11.25

67 People watching this product now!

16mm 6-point spark plug socket with wall thickness 2.8mm, length 63mm, drive size 3/8″.

Specification:

Tips: Installation steps of spark plug

When installing a spark plug, first put the spark plug in the socket, and then use a torque wrench to tighten the spark plug. The general tightening torque is 20Nm.
Align the spark plug with the spark plug socket hole on the cylinder head and lightly screw in the spark plug by hand.
After screwing to about one-half of the total length of the thread, tighten it with a spark plug socket.
When tightening the spark plug, pay attention to align the socket and torque wrench to the spark plug. At the same time, pay attention to the tightening torque not to be too large to prevent damage to the spark plug and the thread of the spark plug bore of the cylinder head.
If the hand feels unsmooth when screwing, exit to check whether there are impurities in the alignment screw or thread. And must not blindly tighten the screw to avoid damage to the screw hole and damage the cylinder head, especially the aluminum alloy cylinder head.
It should be tightened according to the required torque. Too loose will cause air leakage, and too tight will cause the gasket to lose its elasticity, which will also cause air leakage. Since cone-seat spark plugs do not use gaskets, the spark plug must be tightened with a specified torque.
When installing the ignition coil, be careful not to make a mistake in the sequence, and install it according to the original position of each cylinder.