Cigarette Lighter Adapter Extension Cord 5 ft/12 ft

Cigarette lighter adapter extension cord is made of PC, bakelite, fine copper and flame-retarded nylon. It has a good structure, high-quality materials, high performance, strong conductivity, stable current and less heat.

Specification:

Tips: 5 points for using cigarette lighter adapter extension cord

1. Avoid foreign objects entering the cigarette lighter socket
   It is necessary to check whether there is foreign object in the socket before use to avoid damaging the extension cord. Close the dust cap of the cigarette lighter socket immediately after use.
2. Avoid using high power electronic products on cigarette lighter adapter extension cord
   The extension cord also has a maximum power limit. Exceeding this value can easily cause overload of the cigarette lighter extension cord, and then cause various hazards such as burning the extension cord. Therefore, when using an external device, choose the applicable electronic product according to the maximum power.
3. Reasonably plug in and pull out the cigarette lighter plug
   The plug of the cigarette lighter adapter extension cord has a separate fuse device. The correct method of use is to plug in and pull out vertically. It is not recommended to shake while pulling out. Frequent shaking can easily cause loosening and short circuit of the cigarette lighter fuse, and it is easy to burn the insurance and external device.
4. Unplug the external device in time after parking
   When the vehicle is turned off, the external device on the cigarette lighter adapter extension cable should be unplugged as soon as possible. Otherwise, when the vehicle starts, the external device will be burnt easily under the impact of high current. When using electronic products, plug them in after starting the car.
5. If use cigarette lighter adapter extension cord to connect electronic products for a long time, it is best to start the engine.
   If you want to use the adapter extension cord for a long time, or if the device has a little high power, you need to start the car engine to increase the power. So that it will not consume the car battery power. Because the cigarette lighter in the car is DC power taken from the car’s generator. As long as the car’s engine is running, the generator will generate electricity, and the electricity used in the car comes from this. If the vehicle is not started, the battery power is directly consumed, which will easily cause the battery voltage to be too low and it is difficult to start the car. The external device is also not working properly.