Manual Pressure Test Pump, 2.5~6.3MPa

Size chart

Clothing Size Conversion Chart
Category	US	EU	UK	Chest (in)	Waist (in)	Hips (in)
Men	XS	44	34	32-34	26-28	33-35
	S	46	36	34-36	28-30	35-37
	M	48	38	38-40	32-34	39-41
	L	50	40	42-44	36-38	43-45
	XL	52	42	46-48	40-42	47-49
Women	XS	32	6	31-32	24-25	33-34
	S	34	8	33-34	26-27	35-36
	M	36	10	35-36	28-29	37-38
	L	38-40	12-14	37-39	30-32	39-41
	XL	42	16	40-42	33-35	42-44
Youth	XS	128	7	26-28	23-24	26-28
	S	134	8	28-30	24-25	28-30
	M	140	10	30-32	25-26	30-32
	L	146	12	32-34	26-27	32-34
	XL	152	14	34-36	27-28	34-36

Pants Size Conversion Chart
Category	US	EU	UK	Waist (in)	Hip (in)	Inseam (in)
Men	28	44	28	28	34	30
	30	46	30	30	36	31
	32	48	32	32	38	32
	34	50	34	34	40	33
	36	52	36	36	42	34
Women	0	32	4	24	34	30
	2	34	6	25	35	30
	4	36	8	26	36	31
	6	38	10	27	38	32
	8	40	12	28	40	32

Shoes Size Conversion Chart
Category	US	EU	UK	Foot Length (in)
Men	6	39	5.5	9.25
	7	40	6.5	9.625
	8	41	7.5	10
	9	42	8.5	10.25
	10	43	9.5	10.625
	11	44	10.5	11
	12	45	11.5	11.25
	13	46	12.5	11.625
Women	5	35	2.5	8.5
	6	36	3.5	8.875
	7	37	4.5	9.25
	8	38	5.5	9.625
	9	39	6.5	10
	10	40	7.5	10.25
	11	41	8.5	10.625
	12	42	9.5	11
M (Unisex)	5	37	4.5	8.75
	6	38	5.5	9
	7	39	6.5	9.5
	8	40	7.5	10
	9	41	8.5	10.25
	10	42	9.5	10.625
	11	43	10.5	11
	12	44	11.5	11.25

72 People watching this product now!

Pressure test pump is a hydraulic pump applied in industrial and home use, for pressure vessel testing, pipeline pressure testing, etc. Hand operated, portable and convenient.

Specification

Model		T-SYB-25	T-SYB-40	T-SYB-63
Working Pressure	MPa	2.5	4	6.3
	psi	363	580	914
Water Absorption Frequency		13mL
Water Tank		4.5L
Hose Port		G1/2″ (DN15, 20mm)
Weight		2.9 kg
Dimension (LWH)		300180255mm

Installation and Use Precautions

Pressure Gauge Reading

The normal water pressure of tap water is 0.3MPa (0.1MPa is 1kg pressure), and the water pressure of high floors is 0.4MPa.
Water pipe pressure testing is generally between 0.8~1.0MPa. Pressure testing time for household pipelines is maintained at 2 to 4 hours. (The specific situation is subject to the actual construction environment)
Pressure testing for home should be between 0.8~1.0MPa. Excessive pressure will shorten the service life of pipeline and even cause fatal damage to pipeline. For industrial pressure testing, adjust pressure according to demand.

Pressure Relief Valve

The manual pressure test pump has a pressure relief valve. During installation, pressure relief hole must be aligned with the water discharge hole on water tank, to avoid water splashing on the ground or body when pressure relieving.

Pump Head Oil Hole

Pour oil into the hole to lubricate piston and improve the durability of seals.

Manual Pressure Test Pump Operation Steps


1. Assemble the pressure test pump, check whether the main body and accessories are complete.	2. Connect one end of oil tube to pump body. (Pay attention to seal connection and add gaskets, otherwise water will leak)	3. Connect the other end of oil tube to the pipeline to be tested. (Be sure to wrap it with PTFE TAPE)

4. Fill the tested pipe with water, exhaust air, then close the pressure relief valve.	5. Fill the water tank with water, then press the handle rod up and down to start pressure test and pressurization.	6. When the pressure gauge reading rises to the required value, pressurization can be stopped at this time.

Note: After pressurization is stopped, if the value shown on the pressure gauge does not decrease, it indicates that the pipeline has good pressure resistance. On the contrary, it means that sealing performance of the tested pipeline is not good, there is leakage, so the pressure drops.

Tips: Manual pressure test pump troubleshooting.